HOME - Clinical cases - Prosthodontics
 
 
17 November 2025

Brånemark Novum: Prosthodontic and Dental Laboratory Procedures for Fabrication of a Fixed Prosthesis on the Day of Surgery.


Purpose

The purpose of this report is to describe a new technique to fabricate and deliver an implant-supported fixed prosthesis to the patient on the day of surgery, and to propose a protocol for the prosthodontic and dental laboratory procedures.

Materials and Methods

The development of the Brånemark Novum prosthodontic protocol is reviewed, and clinical and dental laboratory assessments and methods are described.

Results

The total treatment time to fabricate a permanent implant-supported fixed prosthesis in the mandible can be reduced to 1 day with the Brånemark Novum technique. The new method includes a precise surgical technique using drilling templates for predetermined implant positions, a rigid splinting of the implants immediately after placement, the use of a prefabricated titanium framework, and elimination of implant impression procedures.

Conclusion

With the technique described in this report, it is possible to provide patients with a permanent implant-supported fixed prosthesis in the mandible on the day of implant surgery. Patient benefits are obvious, with drastically reduced total treatment time, lower cost, and fewer clinical visits.


Authors: Engstrand, Per; Nannmark, Ulf; Mårtensson, Lennart; Galéus, Ingemar; Brånemark, Per-Ingvar

Source: https://openurl.ebsco.com/

Related articles

Computer-aided design and computer-aided manufacturing (CAD/CAM) technology has expanded to embrace implant, maxillofacial and removable prosthodontics including the fabrication of complete dentures.


Prosthodontics is the dental specialty responsible for diagnosis, rehabilitation and maintenance of patients with complex clinical conditions involving missing or deficient teeth and/or craniofacial...


The purpose of this narrative review is to organize information and knowledge about the properties of the clinical evidence of zirconia-applied dental restorations and to provide relevant information...


The early computer-aided design/computer-aided manufacturing (CAD/CAM) systems were relied exclusively on subtractive methods.


A customized treatment plan is important to reach results that will satisfy the patient providing esthetics, function, and long-term stability. 


Read more

The study aimed to assess the shear bond strength, changes in FTIR, and degree of conversion for the primer of orthodontic composite after incorporating nanotheobromine powder.


Research led by Penn Dental’s Henry Daniell investigates the use of a lettuce-based, plant-encapsulated delivery platform as a new oral delivery of two GLP-1 drugs previously approved by the FDA in...


Losing a tooth is paying off this year.


Vatech (KOSDAQ: 043150), a global manufacturer of dental imaging systems, announced that cumulative patent data over the past 20 years demonstrates its technological leadership in dental diagnostic...


Medit, a global provider of digital dentistry solutions, today announced that the “Glow Together” campaign will begin this March. The “Glow Together” initiative began with small steps taken...


 
 
 
 

 
 
 
 

Most popular

 
 

Events