Different Reconstructive Procedures Are Nowadays Available To Allow Implant Placement Also In The Presence Of Severely Atrophic Partially Or Totally Edentulous Ridges, Such As GBR With Particulate Grafts And Resorbable Or Non-Resorbable Membranes Or Autogenous Bone Block Grafts. These Procedures Are Both Reliable But Sometimes Time-Consuming And Very Technically Demanding In Terms Of Adaptation And Fixation Of The Grafts, Both Particulate Or In Blocks.
Recently, Customized, CAD/CAM Titanium Meshes Are Available On The Market With The Aim Of Offering On One Hand Results Similar To Those Obtained With The Traditional Reconstructive Procedures, And On The Other A Relevant Simplification Of The Surgical Procedure.
The Production Of These Ti-Meshes Is In Fact Performed On Personalized 3-D Models Obtained By CBCTs Of The Atrophic Area Of Each Patient Allowing An Extreme Precision And Simplification Of The Adaptation Of The Mesh To The Defect To Be Reconstructed.
Course Objectives:
The Aim Of This Webinar Is To Show Clinical Details And Results Of This New Reconstructive Modality
The Author
Prof Matteo Chiapasco
Graduated In Medicine And Specialized In Maxillofacial Surgery At The University Of Milan, Italy.
Professor, Unit Of Oral Surgery – Department Of Biomedical, Surgical, And Dental Sciences, University Of Milan – Italy
Visiting Professor, Loma Linda University, Los Angeles, California , USA From 2007 Since Today
Visiting Professor, University Of Vienna (Austria) From 2004 To 2016
Member Of The European Board Of Oral And Maxillo-Facial Surgeons, Active Member EAO, ITI Fellow And President Italian Section ITI (2007-2011), President Italian Society Of Oral Surgery (2002-2004), President Italian Society Of Osseointegration (2014-2016), Founder Of The Italian Academy Of Osseointegration (IAO).
Referee For Clinical Oral Implants Research, International Journal Of Oral And Maxillofacial Surgery, And European Journal Of Oral Implantology.
His Main Fields Of Interest Are Oral And Maxillofacial Surgery, With Particular Focus On Orthognatic Surgery And Advanced Preprosthetic Surgery (Reconstructions For Severe Atrophy, Tumor Defects, Trauma Sequelae, Congenital Malformations). He Has Extensively Lectured On These Topics In The Last 25 Years All Over The World.
He Is The Author Of Approximately 300 Publications On Italian Journals And 101 On International, Peer-Reviewed Journals.
H- Index = 45 (Scopus Citation Overview 2020).
He Is The Author And Co-Author Of Approximately 15 Textbooks, Some Of Them Translated In More Than 10 Languages.
For registration visit: https://www.edrapublishing.com/home/529/new-horizons-for-pre-implant-reconstruction-of-atrophic-edentulous-ridges-with-cadcam-customized-titanium-meshes.html
USA 24 May 2026 - 30 November -0001
AGD Scientific Session 2026 in Austin: Event Preview and Professional Highlights
The AGD Scientific Session 2026 will take place from July 8, 2026 to July 11, 2026 in Austin, TX, USA, offering dental professionals a focused environment for continuing education, clinical updates...
USA 03 May 2026 - 30 November -0001
Florida Dental Convention 2026 in Orlando: Key Insights for Dental Professionals
The Florida Dental Convention 2026 will take place from June 25 to June 27 in Orlando, offering dental professionals a focused environment for continuing education, clinical updates and industry...
USA 20 June 2024 - 22 June 2024
Spear Education Announces International Speaker Lineup for Summit 2024
Spear Education is excited to unveil the lineup of featured speakers for Summit 2024, June 20-22, 2024, held in Phoenix, Ariz. Spear Summit is an annual exclusive event open to Spear Education’s...
USA 15 April 2024 - 17 April 2024
April 15-17, St. Louis, Missouri
The National Oral Health Conference is the premier meeting for those interested in continuing education and networking opportunities within the discipline of dental public health.
USA 03 April 2024 - 06 April 2024
April - National Harbor, Maryland
Conference attendees will learn about the latest tech and trends from exhibitors that are industry-leading dental companies. This event gives dental professionals an opportunity to build on what they...
New initiative invites dentists to experience DEXIS’ most advanced AI yet, built on scale, speed, and clinical trust.
News 05 June 2026
(Nasdaq: ALGN), a leading global medical device company that designs, manufactures, and sells the Invisalign® System of clear aligners, iTero™ intraoral scanners, and exocad™ CAD/C
News 05 June 2026
(Nasdaq: HSIC), the world’s largest provider of health care solutions to office-based dental and medical practitioners, today announced that its Board of Directors has elected Will
As the University of Colorado School of Dental Medicine celebrates the graduating DDS Class of 2025, we are proud to recognize the students and faculty members whose exceptional de
Oral surgery 05 June 2026
This peer-reviewed oral surgery article summarizes clinical evidence from International journal of oral and maxillofacial surgery (2026). It focuses on findings that may help dental professionals...